# Conduit Bending Calculator – EMT Offsets | WattsCalc

> Conduit bending calculator for offsets, 90° stub-ups, and 3- or 4-point saddles. Shrink and take-up for 1/2-inch, 3/4-inch, and 1-inch EMT.

## Pages
- [Conduit Bending Calculator – EMT Offsets | WattsCalc](https://wattscalc.com/): Conduit bending calculator for offsets, 90° stub-ups, and 3- or 4-point saddles. Shrink and take-up for 1/2-inch, 3/4-inch, and 1-inch EMT.
- [Conduit Fill Calculator – Dimension Fill Planner | WattsCalc](https://wattscalc.com/conduit-fill-calculator/): Educational conduit fill calculator from measured internal diameter and cable OD. Compare fill% to general 53%/31%/40% bands. Not a code compliance tool.
- [Cable Tray Fill Calculator | WattsCalc](https://wattscalc.com/cable-tray-fill-calculator/): Estimate cable tray fill from usable width, loading depth and cable OD. Compare the percent with your own limit. Educational area maths, not a code approval.
- [Conduit Bending Cheat Sheet & Chart | WattsCalc](https://wattscalc.com/conduit-bending-cheat-sheet/): Conduit bending cheat sheet with reference multipliers, shrink constants, 90° take-up, and common EMT offset heights. Printable field chart.
- [Conduit Shrink Chart & Constants | WattsCalc](https://wattscalc.com/conduit-bending-shrink-chart/): Conduit shrink chart for EMT offsets: what shrink is, why a short stick misses the box, and reference shrink constants from 10° to 60°.
- [Conduit Shrinkage Chart for EMT & Rigid](https://wattscalc.com/conduit-shrinkage-chart/): Conduit shrinkage chart for offset bends: shrink per inch of height from 10° to 60°, with the matching multipliers. Verify on scrap before you cut.
- [Conduit Offset Calculator (EMT & PVC)](https://wattscalc.com/conduit-offset-calculator/): Conduit offset calculator: enter height and angle, read mark spacing and shrink. Optional first mark, fractions, and an IN/MM switch.
- [EMT Offset Multiplier Chart (Degrees & Multipliers)](https://wattscalc.com/emt-offset-multiplier-chart/): EMT offset multiplier chart from 10° to 60° for distance between bend marks. Pair each row with the shrinkage chart before you cut.
- [About WattsCalc | Conduit Bending Calculator](https://wattscalc.com/about/): WattsCalc is a free, offline conduit bending calculator for electricians. Offset estimates, shrink, and 90° take-up. No account.
- [Support WattsCalc](https://wattscalc.com/support/): Optional one-time support for WattsCalc. The conduit bending calculator stays free, with no account and no paywall.
- [Contact WattsCalc](https://wattscalc.com/contact/): Contact WattsCalc about the free conduit bending calculator, chart corrections, privacy, or advertising.
- [Disclaimer | WattsCalc](https://wattscalc.com/disclaimer/): WattsCalc results are estimates. Verify measurements against your bender and local electrical code before cutting or bending conduit.
- [iOS App Privacy | WattsCalc](https://wattscalc.com/app-privacy/): Privacy information for the native WattsCalc iOS app: offline, no account, no tracking, and no data collection.
- [Privacy Policy | WattsCalc](https://wattscalc.com/privacy-policy/): WattsCalc provides a free manual calculator and optional account, AI and payment services.
- [Terms of Use | WattsCalc](https://wattscalc.com/terms/): Terms of use for the WattsCalc conduit bending calculator and field charts. Free personal and job-site use, no warranty.
- [Product Updates | WattsCalc](https://wattscalc.com/updates/): Verified website, companion app, and plugin release notes for WattsCalc.
- [Watts to Amps Calculator](https://wattscalc.com/watts-to-amps/): Convert real electrical power in W or kW to current for DC, single-phase AC or balanced three-phase AC using voltage and power factor.
- [Watts Calculator](https://wattscalc.com/watts-calculator/): Calculate real electrical input power in watts and kilowatts, plus apparent power in VA, from voltage, current and AC power factor.
- [Ohm’s Law Calculator](https://wattscalc.com/ohms-law-calculator/): Solve voltage, current, resistance and power from exactly two known positive values for a DC or resistive circuit.
- [Kilowatt-hour Calculator](https://wattscalc.com/kilowatt-hour-calculator/): Calculate energy in kWh from W or kW, running time in hours or minutes, quantity and repeated days.
- [Electricity Cost Calculator](https://wattscalc.com/electricity-cost-calculator/): Add multiple appliances and estimate each appliance’s kWh and electricity cost from power, daily runtime, quantity, days and your tariff.
- [Voltage Drop Calculator](https://wattscalc.com/voltage-drop-calculator/): Estimate DC two-wire, single-phase AC or balanced three-phase voltage drop using one-way cable length and manufacturer resistance/reactance data.

Sitemap: https://wattscalc.com/sitemap.xml